Displaying similar documents to “Global stability of linearizing control with a new robust nonlinear observer of the induction motor”

Rotary inverted pendulum: trajectory tracking via nonlinear control techniques

Luis E. Ramos-Velasco, Javier Ruiz, Sergej Čelikovský (2002)

Kybernetika

Similarity:

The nonlinear control techniques are applied to the model of rotary inverted pendulum. The model has two degrees of freedom and is not exactly linearizable. The goal is to control output trajectory of the rotary inverted pendulum asymptotically along a desired reference. Moreover, the designed controller should be robust with respect to specified perturbations and parameters uncertainties. A combination of techniques based on nonlinear normal forms, output regulation and sliding mode...

A robust controller design method and stability analysis of an underactuated underwater vehicle

Cheng Siong Chin, Micheal Wai Shing Lau, Eicher Low, Gerald Gim Lee Seet (2006)

International Journal of Applied Mathematics and Computer Science

Similarity:

The problem of designing a stabilizing feedback controller for an underactuated system is a challenging one since a nonlinear system is not stabilizable by a smooth static state feedback law. A necessary condition for the asymptotical stabilization of an underactuated vehicle to a single equilibrium is that its gravitational field has nonzero elements corresponding to unactuated dynamics. However, global asymptotical stability (GAS) cannot be guaranteed. In this paper, a robust proportional-integral-derivative...

Control of an induction motor using sliding mode linearization

Erik Etien, Sébastien Cauet, Laurent Rambault, Gérard Champenois (2002)

International Journal of Applied Mathematics and Computer Science

Similarity:

Nonlinear control of the squirrel induction motor is designed using sliding mode theory. The developed approach leads to the design of a sliding mode controller in order to linearize the behaviour of an induction motor. The second problem described in the paper is decoupling between two physical outputs: the rotor speed and the rotor flux modulus. The sliding mode tools allow us to separate the control from these two outputs. To take account of parametric variations, a model-based approach...

Powerful nonlinear observer associated with field-oriented control of an induction motor

Abdellah Mansouri, Mohammed Chenafa, Abderrahmane Bouhenna, Eric Etien (2004)

International Journal of Applied Mathematics and Computer Science

Similarity:

In this paper, we associate field-oriented control with a powerful nonlinear robust flux observer for an induction motor to show the improvement made by this observer compared with the open-loop and classical estimator used in this type of control. We implement this design strategy through an extension of a special class of nonlinear multivariable systems satisfying some regularity assumptions. We show by an extensive study that this observer is completely satisfactory at low and nominal...

Feedback linearization idle-speed control: design and experiments

Rolf Pfiffner, Lino Guzzella (1999)

Kybernetika

Similarity:

This paper proposes a novel nonlinear control algorithm for idle-speed control of a gasoline engine. This controller is based on the feedback linearization approach and extends this technique to the special structure and specifications of the idle-speed problem. Special static precompensations and cascaded loops are used to achieve the desired bandwidth separation between the fast spark and slow air-bypass action. A key element is the inclusion of the (engine-speed dependent) induction...

A backstepping approach to ship course control

Anna Witkowska, Mirosław Tomera, Roman Smierzchalski (2007)

International Journal of Applied Mathematics and Computer Science

Similarity:

As an object of course control, the ship is characterised by a nonlinear function describing static manoeuvring characteristics that reflect the steady-state relation between the rudder deflection and the rate of turn of the hull. One of the methods which can be used for designing a nonlinear ship course controller is the backstepping method. It is used here for designing two configurations of nonlinear controllers, which are then applied to ship course control. The parameters of the...

Estimation of the output deviation norm for uncertain, discrete-time nonlinear systems in a state dependent form

Przemysław Orłowski (2007)

International Journal of Applied Mathematics and Computer Science

Similarity:

Numerical evaluation of the optimal nonlinear robust control requires estimating the impact of parameter uncertainties on the system output. The main goal of the paper is to propose a method for estimating the norm of an output trajectory deviation from the nominal trajectory for nonlinear uncertain, discrete-time systems. The measure of the deviation allows us to evaluate the robustness of any designed controller. The first part of the paper concerns uncertainty modelling for nonlinear...